New Justice SD-10 "Pro Lite" (( PICTURES ADDED ))

Fred Justice · Post by **Fred Justice** » 15 Sep 2011 9:42 am

"Pictures Added" Visit our website for more detailed information and slide show.
http://www.fredjusticemusic.com/id28.html

Hi everyone, we have been working on a new model for some time now, and its just days from unveiling.
This is a professional SD-10 model in every way, but has been lightened up to weight about 26 lbs. out of the case.
The cabinet will measure 9&1/2 inches wide with a 3 inch pad. A real nice powder coating finish with 3 pedals and 4 knee levers (vertical KL optional)
This guitar has high end quality in design and craftsmanship, and will have that Justice tone just like our Pro model, The Judge.
This guitar has been designed with the Pro player in mind that wants to fly their guitar and come in under 50 lbs. The "Pro Lite" is NOT a student model.
Yet affordable enough for the beginner wanting to get started and not spend the big bucks.

Now for the good part, were shooting for a retail price for the Justice "Pro Lite" at $1995.00
Don't etch that in stone but that's what its looking like.
Were under two weeks away, in fact I hope to unveil the "Pro Lite" at the Baxter Springs KS. Show Sept. 30th.

Pictures will be forthcoming, thanks for looking.

ray qualls · Post by **ray qualls** » 15 Sep 2011 11:49 am

Fred, we here at the KSGA are honored that you will be unveiling the SD-10 here at our show! I know that it will be a great guitar and at a great price too! Looking forward to seeing you in a couple of weeks. Ray

Jerry Foster · Post by **Jerry Foster** » 16 Sep 2011 8:44 am

Fred never ceases to amaze me. I am Going to test drive this new pro-lite Steel out.

looking forward to seeing everyone there at the Baxter Springs KS. show. see yah there. Jerry & Dee F.

Fred Justice · Post by **Fred Justice** » 18 Sep 2011 6:52 am

Ray, Jerry, thanks for your post. Its getting closer, the cross rods go in in the morning and I hope to have some "DONE" pictures by Thursday.
It is so cool, of course the Proto (first one) will always have a home here at its birth place.
I've already got the case done and it should be travel worthy by next weekend and officially go on the market at the Baxter Springs Show. Watch for it on our website.
Two players have already requested to play the Pro Lite on their set at this show.
Watch for more updates and thanks for looking.

Fred Justice · Post by **Fred Justice** » 22 Sep 2011 3:16 pm

Well I got done with the "Pro Lite" a day early.
So as promised here are a series of pictures.
The first Justice Pro Lite is done and ready to travel to the Baxter Springs KS. Show next week.

I've already received two orders sight unseen, WOW.
Well here are the pictures, I hope you like it.
Thanks for looking.
See our website for more detailed information and slide show.
http://www.fredjusticemusic.com/id28.html

Clark Doughty · Post by **Clark Doughty** » 23 Sep 2011 5:58 am

Beautiful guitar, nice design, very appealing and I really like the looks of the mechanics. You've done it again Fred, a class insturment...............clark

Rick Barnhart · Post by **Rick Barnhart** » 23 Sep 2011 6:13 am

Fred, I've owned a really nice student guitar. I know this is a pro lite and not necessarily a student model, but it's the best looking economy guitar I've ever seen... I'm sure it has that great Justice touch, feel and sound to it too. I can't wait to see it in person. Congratulations!!!!

CrowBear Schmitt · Post by **CrowBear Schmitt** » 23 Sep 2011 8:56 am

Looks like a winner !

Greg Cutshaw · Post by **Greg Cutshaw** » 23 Sep 2011 9:37 am

It appears that you have included split tuning? If so that is a big plus!

Greg

Fred Justice · Post by **Fred Justice** » 23 Sep 2011 10:07 am

Clark D. thank you for your inspiring words Sir.

Rick B. thanks for your round of confidence buddy.

Crowbear, good to hear from you. Yes, I believe it to be a winner. Its a pro guitar in every way, just doesn't have a suit and tie on.

Greg thanks for chiming in pal.
The Pro Lite is a pro guitar, it has triple raise, triple lower, split tuning, a BL 705 PU, on a 9-1/2 inch cabinet.
It weighs in at 26.4 lbs. out of the case, about 45 lbs. in the case. Tone to the bone at $1995.00 plus shipping, how sweet it is.

Check out the new "Pro Lite" page with slide show on our website.
http://www.fredjusticemusic.com/id28.html

Billy Carr · Post by **Billy Carr** » 23 Sep 2011 11:58 am

Very nice. I'm impressed!

Larry Baker · Post by **Larry Baker** » 23 Sep 2011 1:25 pm

Looks great Fred, see ya in Baxter in a week. Larry

Michael McGee · Post by **Michael McGee** » 23 Sep 2011 8:39 pm

Looks super, my brother. 45 lbs for a guitar with these features is great.

Billy Carr · Post by **Billy Carr** » 23 Sep 2011 11:34 pm

Just wondering if the Pro Lite will be available in the same mica colors as the other models. Say, red burl maybe?

Ron Pruter · Post by **Ron Pruter** » 24 Sep 2011 2:21 am

Hi Fred.
Looks great. I just spent two days buffing my end plates, with alot more buffing to go. I remember what you said when I asked you for buffing advice.
"Don't do it" RP

Fred Justice · Post by **Fred Justice** » 24 Sep 2011 5:10 am

Larry B. that's right, a week from today.
Don't forget about the picnic at the river Thursday night at 4:00 PM

Mike my dear friend, thanks for your confidence in me.

Billy C. yes, except for the pearl's and ripple's, all and any standard mica colors I stock is available for the Pro Lite as well. However, two tone or split fronts are not available on the Pro Lite.

Ron P. ole pal, I gotta say "I told ya so"
Unless you have access to a pro buffing shop, I wouldn't even start, way to messy and time consuming for the results at home.
We need to get you in a Pro Lite anyway.

Check out the slide show on our website.
http://www.fredjusticemusic.com/id28.html

Carl Williams · Post by **Carl Williams** » 24 Sep 2011 7:37 am

Hey Fred,
Looks like another winner from the Justice Steel Guitar company's lineup! My ONLY concern is that the BIG TUNING WRENCH fits her??!!

Best wishes for continued success...Carl

Marlin Gengenbach · Post by **Marlin Gengenbach** » 24 Sep 2011 7:15 pm

Hey Fred,
You'll be working weekends to keep up with the orders for this guitar. Excellent value, plus it has a pad.
Marlin

Larry Petree · Post by **Larry Petree** » 25 Sep 2011 10:24 am

Looks good Fred.

David Hartley · Post by **David Hartley** » 25 Sep 2011 2:25 pm

Congratulations.
I like it.
I know it will have the sound.
Good price.
Keep up the good work.
Great colours.
Pick up mount perfect..

See you soon..

Jody Cameron · Post by **Jody Cameron** » 26 Sep 2011 5:54 am

This guitar looks great, Fred! I know you will have wild success with this one...your pal, Jody

Fred Justice · Post by **Fred Justice** » 26 Sep 2011 6:25 am

Hey Carl, not to worry buddy the BIG tuning wrench fits the Pro Lite like a glove.

Marlin, shucks I'm already working weekends and were just getting started on the Pro Lite.

Larry thank you, you may have to have one of these you know.

David thank you for your positive comments brother.
You know you would look good sitting behind a Justice.

Jody my friend your right. its already taking off and were just getting started. WOW.

Much thanks to all that have posted about our new "Pro Lite"
UPDATE: I just weighed the Pro Lite in the case and it weighs 44.6 lbs. just right for flying, under 50 lbs.
26.4 lbs. out of the case.

Jerry Foster · Post by **Jerry Foster** » 27 Sep 2011 2:49 pm

Fred; that is my kind of Steel. I always have to have the First:lol: O well you know how I am .

I will see you Thursday in Baxter Springs Ks.just can't wait to play that new pro-lite Justice. we love you all, Jerry & Dee F.

Fred Justice · Post by **Fred Justice** » 28 Sep 2011 1:40 am

The Pro Lite is all loaded up and going for its first ride this morning.
I'm hitten the road here in about an hour, see you all in Baxter Springs Kansas Thursday afternoon good Lord's willing.
You all bring your picks and bar and take little red for a test drive.

Fred Justice · Post by **Fred Justice** » 14 Oct 2011 5:24 am

The introduction of the new Justice Pro Lite has been a wonderful success. Orders are being filled as we speak. Place your order today for the 26 lb. Pro Lite SD-10

Here's what you get for your $1995.00 + shipping.

1. Solid hard rock maple cabinet.
2. Machined parts,including neck,end plates,key head.
3. Full size aluminum neck (just like the Judge)
4. Adjustable return springs.
5. Triple raise triple lower pro changer.
6. Split tuning on all strings.
7. Delron bearings and nylon stops throughout.
8. 3 pedals, 4 knee levers standard.(add more option)
9. Aluminum legs, & leg pouch.
10. New Justice standard case.

This is a tremendous value in today's economy, get your order in early.
Thank you all and God bless.

The Steel Guitar Forum

New Justice SD-10 "Pro Lite" (( PICTURES ADDED ))

New Justice SD-10 "Pro Lite" (( PICTURES ADDED ))

Justice pedal steel Guitars

New Justice Guitar

Pro Lite

psg

Now That's "Justice"!! :)

pro lite

bump

Hi Fred